fireTMS > Blog > Load distribution on route and other functions of fireTMS

Load distribution on route and other functions of fireTMS

clock3 minutes reading

September 11, 2023 / Author: fireTMS team

In this article, we describe the following functions:

Loads at disposal and in the warehouse

In order to check which load has not yet been assigned, you need to go to Loads >> All loads. From the selected load, you can create a forwarding order, inter-branch or internal. There is also an option to upload the goods to the Trans.eu platform.

To check information on the loads you have in your warehouses, go to Loads >> Loads in a warehouse. If you have several warehouses, in the Status line, you will see information on the warehouse where the load is located. It can be edited, issued on the Trans.eu platform or a new forwarding or transport order can be created.

Allocation of loads on the route

If a load needs to be split on the route after it has been collected, enter the load as a whole in the first step and save it without creating an order. In the new window that appears, select the option on the right-hand side Planning >> Tranship load on route (this will allow subsequent transhipment to be performed). In the next step, you select the freight to be reloaded together with the date and place of reloading. Finally, you confirm your selection via the Change button and the system will automatically generate 2 subloads.

All separated subloads will be available under the Loads >> Available loads tab, where it will be possible to create a new forwarding or transport order out of them.

Creation of a new order with several loading locations

To create a new order with several loading locations, go to Order >> New internal order. First complete the Basic data, i.e. select the contractor and complete the other required sections, i.e. currency, total amount, date and other fields. To add a new contractor, simply click on the plus sign displayed on the right and enter the necessary information.

To add an extra loading spot, select the Add loading button and then complete the mandatory fields.

For example: if you need to carry out loading at pt. A (1 item) and at point B (1 item) and unload (2 items), then select Unload goods. You then separate the part of the goods to be unloaded at the first point and confirm with Unload. The remaining goods will automatically be sent to the second unloading point. Finally, after completing all the data, select Confirm order and specify whether the goods are to be dispatched as an internal order ( private vehicle) or an external order.

Would you like to find out more about the system’s capabilities? Contact us!

Newsletter

Information from fireTMS is as valuable as the cargo

We regularly provide information about our system and on topics in the TSL industry.

Subscribe to our newsletter and stay up to date.

GDPR Information Obligation - Personal Data Controller

fireTMS.com sp. z o. o. is your personal data controller. The data indicated in this form will be processed in order to deliver fireTMS.com sp. z o. o. newsletters on the basis of legitimate interest - Article 6(1)(f) GDPR. Providing data is voluntary, but necessary to receive the newsletter. Your rights and the principles of personal data processing are detailed in the Privacy Policy.
Tags
Rate the article!

0

2 ratings, avg: 5
fireTMS team

fireTMS team

The article was written by the fireTMS team, based on their knowledge, experience and awareness of the TSL industry.

See similar articles
Maps in fireTMS – new features

Maps in fireTMS – new features

fireTMS maps enable precise route planning for trucks. Just provide the route points and the system will show a cost-effective route with a detailed calculation of costs. With the new version of fireTMS the maps has gained features, that will help to provide reliable routes. Read the article and find out more. In this article […]

clock3 minutes readingRead More
Fuel expense register

Fuel expense register and other features in fireTMS

With this article, you will learn more about features such as:  Fuel expense register  fireTMS enables you to assign fuel costs directly to a given vehicle manually. To register a single fuel cost, you need to go to Vehicles >> Expenses >> Register expense >> Register fuel expense. You need to complete the data in […]

clock3 minutes readingRead More
Generating dual-currency invoices in fireTMS

Generating dual-currency invoices in fireTMS

From this article you will learn about features such as:  Generating dual-currency invoices fireTMS offers advanced tools that will streamline and improve the quality of accounting work. One of them is the automatic generation of dual-currency invoices for a selected contractor.  To do this, just go to Accounting >> Contractors, in the edit field of […]

clock3 minutes readingRead More